Products
Hydrogen Generators
Mercury alkaline electrolysers (aka hydrogen generators) represent a perfect solution for any industrial requirement.
Thanks to ErreDue’s electrolytic technology, Mercury Hydrogen Generators produce pure hydrogen and oxygen in two separate streams, directly at desired pressure (5, 12 or 30 bar). In case of applications where a very high purity is needed (up to 99,9995%),
ErreDue is able to offer a wide range of purification systems, stand alone or integrated in the generator, to satisfy every need. Mercury Hydrogen Generators can be fed by renewable energy sources, in order to be used as clean energy storage systems coupled with fuel cells.
Mercury alkaline electrolysers represent a perfect solution for any industrial requirement.
Thanks to ErreDue’s electrolytic technology, Mercury generators produce pure hydrogen and oxygen in two separate streams, directly at desired pressure
(5,12 or 30 bar). In case of applications where a very high purity is needed (up to 99,9995%),
ErreDue is able to offer a wide range of purification systems, stand alone or integrated in the generator, to satisfy every need. Mercury Hydrogen generators can be fed by renewable energy sources, in order to be used as clean energy storage systems coupled with fuel cells.
Hydrogen Purification Systems
ErreDue designs and manufactures a wide range of equipment for gas purification, produced either by generators or from external sources.
The purification allows the user to have a secure and guaranteed quality of gas through ongoing PLC process monitoring.
Gas purification allows you to recover and to reuse process gases, which are usually dispersed in the atmosphere, with big savings and fast amortization
of the machine. With ErreDue gas purifiers you can purify and reuse the following gases:
HYDROGEN – ARGON – OXYGEN – NITROGEN – CNG etc.
Hydrogen Compression & Storage
- For heavy-duty, high-duty cycle Industrial Applications
- Any pressure configuration all the way through to 1000 bar
- Long service interval hours.
- 35 MPa Hydrogen Refuelling Stations: Compressors reaching 450 bar
- 70 MPa Hydrogen Refuelling Stations: HYDRUS booster reaching 1000 bar
- Storage solutions 0 – 1000 bar
- Industrial Applications: Usually stored between 160 and 200 bar
- Power to Gas: For grid injection or trailer filling 75 to 250 bar
- Industrial Hydrogen Production: Trailer filling up to 250 bar
- 35 MPa Hydrogen Refuelling Stations: Compressors reaching 450 bar
- 70 MPa Hydrogen Refuelling Stations: HYDRUS booster reaching 1000 bar
Zero Emissions Hydrogen Buses
Battery Electric Vehicles will co-exist with Fuel Cell Electric vehicles, depending on the type of vehicle and the use-case; the heavier the vehicle, and the more hours of operation per day, the more likely that hydrogen will be the clear choice.
- Zero Emissions – Only water comes from hydrogen power generation, no toxic gases
- Strong Performance – Significant torque advantages for better acceleration and climbing
- Passenger Comfort – Reduced noise and smooth power delivery
- Fast Refuelling ensures no charging downtime
– Usual bus refilling time 6 – 8 minutes
Full Route Flexibility – Far greater range than battery EV, eliminates the need to limit routes
Zero Emissions Hydrogen Buses
Battery Electric Vehicles will co-exist with Fuel Cell Electric vehicles, depending on the type of vehicle and the use-case; the heavier the vehicle, and the more hours of operation per day, the more likely that hydrogen will be the clear choice.
- Zero Emissions – Only water comes from power generation, no toxic gases
- Strong Performance – Significant torque advantages for better acceleration and climbing
- Passenger Comfort – Reduced noise and smooth power delivery
- Fast Refuelling Ensures No Charging Downtime
– Cars: 3 x minutes
– Heavy vehicles: 7-10 x minutes
Full Route Flexibility – Far greater range than battery EV eliminates the need to limit routes
Zero Emissions Hydrogen Trucks
Leveraging world-leading Fuel Cell Technology, Australian Hydrogen Generation can offer heavy duty hydrogen trucks at costs competitive with traditional diesel vehicles.
- Hydrogen Concrete Mixers, Street Sweepers, Garbage Trucks, Port Trucks
- Based on DAF European Truck Chassis – Advanced Safety Levels
- Adaptive Cruise, Lane Assist Predictive Braking (ADAS Level 2) offered on all vehicles
- Advanced telemetry function on board to support fleet management (configurable with specific client)
- 50T gross combination mass
- 400 to 600 km driving range
Zero Emissions Hydrogen Trucks
Leveraging world-leading Fuel Cell Technology, HYZON Motors offers heavy duty trucks at costs competitive with traditional diesel vehicles, partnering with green hydrogen producers.
- Concrete Mixers, Street Sweepers, Garbage Trucks, Port Trucks
- Based on DAF European Truck Chassis – Advanced Safety Levels
- Adaptive Cruise, Lane Assist Predictive Braking (ADAS Level 2) offered on all vehicles
- Advanced telemetry function on board to support fleet management (configurable with specific client)
- 50T gross combination mass
- 400 to 600 km driving range
Hydrogen Refuelling and Dispensing Units
A hydrogen refuelling station (HRS) is composed of a basic dispensing unit, plus a production unit, if the hydrogen is produced on site. It is very similar to a standard petrol fuel pump.
The basic unit includes a high-pressure storage system and
one or more dispensers. If the H2 is produced on site or is
delivered to the station at an intermediary pressure or in liquid
state, the basic unit also requires an intermediary storage
(based on gaseous or liquid hydrogen technology) and a
compression system.
The fuelling nozzle is designed for the pressure of the hydrogen
fuel tank, i.e. 350 or 700 bar. The user interface contains various
displays showing pressure, fill level or measured quantity.
A hydrogen refuelling station (HRS) is composed of a basicdispensing unit, plus a production unit, if the hydrogen is produced on site. It is very similar to a standard petrol fuel pump.
The basic unit includes a high-pressure storage system and
one or more dispensers. If the H2 is produced on site or is
delivered to the station at an intermediary pressure or in liquid
state, the basic unit also requires an intermediary storage
(based on gaseous or liquid hydrogen technology) and a
compression system.
The fuelling nozzle is designed for the pressure of the hydrogen
fuel tank, i.e. 350 or 700 bar. The user interface contains various
displays showing pressure, fill level or measured quantity.
Hydrogen Gensets and Fuel Cells
Portable hydrogen all in one generator, 48V DC BESS output or complete 415VAC 3phase incorporating battery and inverter.
We can provide stationary Hydrogen Fuel Cells from small to 100 KW. As they are modular, we can build them to any size you’d like.
- Zero-Emission of particulate matter and NOx;
- Zero-Emission of CO and CO2 in operation pure hydrogen;
- Long life time (>20.000 hours) to refurbishment;
- High power density;
- Low temperature and – by extension – versatile operation
- Proven technology with strong track record in a large variety of applications;